Solar Trackers
1.5kW Dual Axis Solar Tracker
Our 1.5kW Solar Tracker is a dual axis automatic solar panel tracking system that enables your solar panels to generate maximum power from the Sun regardless of the time of the day, season or time of year.
It is ideally suited for use as a power supply for a water pump. Using this solar tracker your pump will start pumping earlier than with static panels and usually within an hour after sunrise. It will also keep pumping for a few hours longer and stop just before sunset. This is an extremely useful feature in cases where there is a small stream or limited water source, particularly during the summer months.
As the system incorporates dual axis tracking there is no need for any adjustments as the seasons change. The solar panels always face the Sun throughout the day. An optional wind sensor will add additional protection in very windy condition as the tracker will park panels horizontally during periods of excessively high winds.
Testing has proven that the dual axis solar panel trackers consistently outperform fixed solar panels. If used to run a water water pump it would provide power for an extra 6-7 hours each day compared to a fixed panel system.
The tracking mechanisms incorporate high quality, heavy-duty slewing drives for azimuth tracking (0 – 270 degrees) and actuators for elevation tracking (0 – 60 degrees) which covers the complete Sun’s path throughout the year.
The system is designed to work maintenance free for many years and is also cyclone rated and certified.
Having capacity of up to 1500 Watts or up to 7 square meters of solar panels, it could be used for other purposes including a workshop power supply or work lights by simply charging batteries and combining with 240 Volt inverter.
Specifications
Model
TerrSat 1.5kW Solar Tracker
Power
Up to 1500Watts or up to 7 square metres of panels
Tracking
Dual Axis. Elevation 0 – 60 degrees. Azimuth 0 – 270 degrees
Wind Protection
Optional. Wind sensor forces tracker to park the panels horizontally during strong wind
Structural Integrity
Cyclone rated
Manufactured
Assembled in Australia using local and quality imported components
Warranty
3 Years
3kW Dual Axis Solar Tracker
Our Solar Trackers enable your solar panels to generate maximum power from the Sun regardless of the season or time of the year. We offer a range of options and can design a tailor-made solution to meet your specific needs.
By following the Sun’s path throughout the day, you can get far more power from your solar panels comparing to fixed panels facing North and installed at a pre-set angle.
As a result of dual axis tracking there is no need for any adjustments as the seasons of the year change, solar panels always face the Sun throughout the day.
Testing has proven that the dual axis solar panel trackers consistently outperform fixed solar panels.
The tracking mechanisms incorporate high quality, heavy-duty slewing drives for azimuth tracking (from -130 to 0 which is North to +130 degrees) and actuators for elevation tracking (0 – 60 degrees) which covers the complete Sun’s path throughout the year.
The system is designed to work maintenance free for many years and is also rated for heavy duty performance.
Both our Solar Trackers including structural design, electronic tracker, and solar sensors, are proudly designed and manufactured by TerrSat Pty Ltd.
Our tracking systems also incorporates a wind sensor which forces the tracker to ‘park’ the panels horizontally during strong winds for protection and added peace of mind.
The additional power consistently generated through active tracking means that you need less panels to achieve same or higher power compared to a fixed panel system. Most importantly, this means you get your money back sooner on the initial investment.
Specifications
Model
TerrSat 3kW Solar Trackers
Power
3kW
Tracking
Dual Axis. Elevation 0 – 60 degrees. Azimuth -130 to +130 degrees from North
Wind Protection
Included. Wind sensor forces tracker to park the panels horizontally during strong wind
Structural Integrity
Heavy Duty
Manufactured
Designed and manufactured in Australia using local and imported quality components
Warranty
3 Years